EFFICIENT, EASILY CLEANED FILTERS, AT THE LOWEST POSSIBLE PRICE
These filters are built on the proven design of the common "Y" strainer, but instead of a coarse screen, they contain a true micron-rated filter element whose pleated element surface area is up to four times greater. In fact, the filtering area in the "Y" filter design is equal to that found in standard hydraulic filters, but at a fraction of the cost! The flow path in the "Y" design is through the inside surface of the element, where the contaminant is caught. There can be no dirt "wash-off" of the element downstream during servicing. This also minimizes the formation of air pockets within the filter element.
NPT ports are standard, but SAE straight-thread ports may be ordered. Sizes are:
Many other styles are available. Ask for our Catalog DCK-3
See How To Order for dirt indicator, magnets, and built-bypass.
FILTER ELEMENT AREAS
Use the flow rate table to select the proper model number and building an ordering code as shown in the example:
The Y- 2 is a tiny powerhouse. Rated at 250 PSI and constructed of 316 stainless steel, this unit finds wide application in both suction and return line service. It's available in connection sizes of 1/4", 3/8" and 1/2" NPT. The stainless steel elements are availabe in 595, 238, 149, 74, 63, 40 and 25 micron.
|Flow Rate:||Up to 2 GPM|
|Filtration Area:||2.5 Square Ounces|
|Dimensions:||2-1/2 x 2-1/4-in.|
Select the desired specifications from the ordering table and build an ordering code number, as shown in this sample: